Command
Description
nid2nic
Prints all
nid
-to-
nic_address
mappings. See the
nid2nic(8)
man page for more information.
rtr
Performs system routing. See the
rtr(8)
man page
for more information.
xtagent
Generic agent for accessing the event router.
xtalive
Checks for life of HSS daemons. See the
xtalive(8)
man page for more information.
xtbounce
Initializes Aries and HSN links. Powers down nodes as
needed. See the
xtbounce(8)
man page for more
information.
xtcablecheck
Compares the link endpoint pairs as known to the
routing software with the link ID values set in MMRs in
each LCB in the Aries ASIC to insure the HSN is cabled
correctly.
xtccpasswd
Changes the password for all Rack Controllers (RCs),
Dual Aries Network Card Controllers (dANCCs), and
Intelligent Subrack Control Boards (iSCBs) on Urika-
GX. It must be run as root.
xtcc-ssh-keys
Creates and modifies the
authorized_keys
file for
Rack Controllers (RCs) and dANCCs.
xtchecklink
Checks HSN and PCIe link health.
xtclass
Displays the network topology class for this system.
xtclear
Clears component flags in the State Manager. For more
information, see the
xtclear(8)
man page.
xtcli
Controls dANC and node power, displays status and
sets administrative component status. See the
xtcli(8)
man page for more information.
xtcon
Provides a two-way connection to the console of a
node. For more information, see the
xtcon(8)
man
page.
xtconsole
Displays console text from one or more nodes.
xtconsumer
Displays HSS events.
xtdaemonconfig
Configures HSS daemons dynamically.
xtdiscover
Discovers and configures the Cray system hardware.
This command is also used to populate the HSS
database and set up HSS IP networking. For more
information, see the
xtdiscover(8)
man page.
xtdumpsys
Gathers information when a system node stops
responding or fails.
xterrorcode
Displays event error codes.
xtfileio
Performs file transfer to/from HSS controllers.
System Management
S3016
28
