Error Message
Description
Resolution
Invalid app name. Your app name
can consist of a series of names
separated by slashes. Each name
must be at least 1 character. The
name may only contain digits (0-9),
dashes (-), dots (.), and lowercase
letters (a-z). The name may not
begin or end with a dash.
This error is seen when the
identifier provided by user for the
flex up request is invalid.
Follow the rules mentioned there
and re-submit a new flex up
request.
Total number of resources not set in
the /etc/urika-yam.conf file, please
re-check the configuration file
In
/etc/urika-yam.conf
file, the
number of resources is set by
default. The total number of
resources may not have been set.
Re-check the status of mesos
cluster.
Hostname is not set in the /etc/
urika-yam.conf file, please re-check
the configuration file.
In
/etc/urika-yam.conf
file, the
parameter
hostname
is set by
default. The value set may not be
correct or may not have been set.
Ensure that this parameter is set,
and the value is the same as default
value.
Mesos port is not set in the /etc/
urika-yam.conf file, please re-check
the configuration file
In
/etc/urika-yam.conf
file, the
parameter
marathon_port
is set
by default. This parameter may not
have been set or value set may not
be set to the same as the default
value.
Ensure that this parameter is set,
and the value is the same as default
value.
Marathon port is not set in the /etc/
urika-yam.conf file, please re-check
the configuration file.
In
/etc/urika-yam.conf
file, the
parameter marathon_port is set by
default. This parameter may not
have been set or value set may not
be set to the same as the default
value..
It should be ensured that this
parameter is set, and the value is
the same as default value.
The number of nodes you
requested to flex up is greater than
the total number of resources
available. Please enter a valid
number of nodes
This error is seen when the number
of nodes requested to flex up is
more than the total number of
nodes available in the cluster
Submit a new flex up request with
nodes less than or equal to the
number of nodes available in the
cluster.
App '/$marathon_app_name' does
not exist. Please re-check the
identifier corresponding nodes you
flex up, that you would like to flex
down
The identifier provided for flex down
does not exist.
Re-check the usage: if operating as
the root user, please provide the
complete name as seen in urika-
yam-status or as a non-root user,
ensure to provide the same
identifier used at the time of flex up.
In addition, check
if
/var/log/urika-yam.log
reflects any log messages where
timeout criteria has been matched
and there was a flex down of the
app already.
Troubleshooting
S3016
262
