manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 188

DRY RUN:  The follwing network device files would be created under /etc/sysconfig/network-scripts

ifcfg-br1

------------------------

DEVICE=br1

TYPE=Bridge

BOOTPROTO=static

ONBOOT=yes

NM_CONTROLLED=no

IPADDR=172.30.51.152

NETMASK=255.255.240.0

GATEWAY=172.30.48.1

DNS1=172.30.84.40

DNS2=172.30.84.40

DOMAIN=us.cray.com

ifcfg-enp7s0f1

------------------------

NAME="enp7s0f1"

DEVICE="enp7s0f1"

ONBOOT=yes

BOOTPROTO=static

TYPE=Ethernet

NM_CONTROLLED=no

BRIDGE=br1

The 

--opns-enable-dryrun

 option is used in the preceding example only to indicate that the files

requested by the user will be generated by the 

utm-host-net

 command. This option should be replaced

with 

--opns-enable

 during the actual execution of the 

utm-host-net

 command.

Execution of the command with the 

--opns-enable

 option is shown below:

# 

utm-host-net --opns-enable \

172.30.51.152,xx,255.255.240.0,172.30.48.1,172.30.84.40,172.30.84.40,us.cray.com

Urika Tenant Management network configuration

---- Status of Operations network ----

Missing bridge: br1

Found operation network ethernet device: enp7s0f1 state=[br1 

NO_IP_LINK,enp7s0f1 UP(using bridge: NO)(IP: 172.30.51.152/20)]

---- Action ----

The Operations network on this host will need to be be updated for UTM

Running: mv /etc/sysconfig/network-scripts/ifcfg-enp7s0f1 /etc/sysconfig/

network-scripts/pre-utm/ifcfg-enp7s0f1.111317_105827

Running: cp /tmp/tmp.6x4v6LPNQP/ifcfg-br1 /etc/sysconfig/network-scripts/ifcfg-

br1

Running: cp /tmp/tmp.6x4v6LPNQP/ifcfg-br1 /etc/sysconfig/network-scripts/post-

utm/ifcfg-br1

Running: cp /tmp/tmp.6x4v6LPNQP/ifcfg-enp7s0f1 /etc/sysconfig/network-scripts/

ifcfg-enp7s0f1

Running: cp /tmp/tmp.6x4v6LPNQP/ifcfg-enp7s0f1 /etc/sysconfig/network-scripts/

post-utm/ifcfg-enp7s0f1

Please reboot now.

Restarting the interfaces should be performed using the instructions provided in the next step.

4. Bring up the new interfaces.

To reboot the 

br1

 and the 

eht1/enp7s0f1/enp8s0f1

 interfaces, use the 

ifdown

 and 

ifup

 commands.

●

For a bare bones 

ifcfg-br1

 configuration, execute:

# 

ifup br1

●

For manually configured 

ifcfg-br1

 and 

ifcfg-enpXs0f1

 network commands or 

utm-host-net

generated files, execute:

Security

S3016 

 

 188

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands