manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 174

2. Ensure that the directory was properly quiesced and see if there are any outstanding requests. Repeat this

occasionally to know when all outstanding requests have been cleared.

dvs1# 

cat /proc/fs/dvs/quiesce

/gpfs/test/foo/:   Outstanding_Requests 3

3. Unquiesce the directory when finished with it.

dvs1# 

echo unquiesce /gpfs/test/foo > /proc/fs/dvs/quiesce

4. Ensure that the directory is no longer on the quiesced list.

dvs1# 

cat /proc/fs/dvs/quiesce

6.1.8.6.2 Use Case: Quiesce All Directories on a DVS Server

Prerequisites

This procedure requires administrative privileges.

About this task

The example provided in this procedure is for a scenario in which an admin wants to remove a DVS server from
service but wants to let any outstanding request complete first.

Procedure

1. Quiesce all directories on that server on the DVS server.

dvs1# 

echo quiesce / > /proc/fs/dvs/quiesce

2. Look for any outstanding requests and repeat this occasionally to know when all outstanding requests have

been cleared.

When no outstanding requests remain, the server can be removed from service.

dvs1# 

cat /proc/fs/dvs/quiesce

/:           Outstanding_Requests 3

3. Unquiesce all of its projected directories to allow traffic to this server to resume.

dvs1# 

echo unquiesce / > /proc/fs/dvs/quiesce

Cray DVS

S3016 

 

 174

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands