Check the state manager
crayadm@smw>
xtalive -l smw -a sm s0
3.4.24 View Component Alert, Warning, and Location History
Use the
xtcli comp_hist
command to display component alert, warning, and location history. Either an error
history, which displays alerts or warnings found on designated components, or a location history may be
displayed.
Display the location history for component
r1s0c1n2
crayadm@smw>
xtcli comp_hist -o loc r1s0c1n2
For more information, see the
xtcli(8)
man page.
3.4.25 Display Alerts and Warnings
Use the
xtshow
command to display alerts and warnings. Type commands as
xtshow
--option_name
, where
option_name
is
alert
,
warn
, or
noflags
.
Alerts are not propagated through the system hierarchy, only information for the component being examined is
displayed. For example, invoking the
xtshow --alert
command for a cabinet does not display an alert for a
node. Similarly, checking the status of a node does not detect an alert on a cabinet.
Show all alerts on the system
crayadm@smw:~>
xtshow --alert
Alerts and warnings typically occur while the HSS
xtcli
command operates; these alerts and warnings are listed
in the command output with an error message. After they are generated, alerts and warnings become part of the
state for the component and remain set until manually cleared.
For additional information, see the
xtshow(8)
man page.
3.4.26 Display Error Codes
When an HSS event error occurs, the related message is displayed on the SMW. The
xterrorcode
command
on the SMW displays a single error code or the entire list of error codes.
Display HSS error codes
crayadm@smw>
xterrorcode errorcode
A system error code entered in a log file is a bit mask; invoking the
xterrorcode
bitmask_code_number
command on the SMW displays the associated error code.
System Management
S3016
40
