manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 233

NOTE: CSMS is not used in post Urika-GX 1.2UP00 releases.

3. Save the 

/etc/haproxy/haproxy.cfg

 configuration file.

4. Edit the 

/etc/httpd/conf.d/ssl.conf

 file to replace the path in following line with the path to the actual

pem

 file.

SSLCertificateFile /etc/ssl/certs/filename.pem

SSLCertificateFile /etc/pki/tls/certs/localhost.crt

5. Restart HAProxy

# service haproxy restart

6. Uncomment the following lines and make sure they are set to 

true

 in 

/etc/hue/conf/hue.ini

use_x_forwarded_host=true

secure_proxy_ssl_header=true

7. Restart the HUE service.

# service urika-hue restart

8. Uncomment the following lines (or add if they do not already exist)

in 

/opt/cray/ui-application-management/default/application_management/settings.py

SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTO', 'https')

USE_X_FORWADED_HOST = True

9. Set 

USE_SECURE_URLS

 to 

True

in 

/opt/cray/ui-application-management/default/application_management/settings.py

,

as shown in the following example. This allows the Urika-GX Applications Interface page to load secure
URLs (configured in the preceding steps) when the HUE/Grafana/Jupyter/Urika-GX Application Management
UIs are accessed from the Urika-GX Applications Interface page. If there is any change in the HAProxy port
numbers, the following URLs in 

settings.py

 need to be updated:

USE_SECURE_URLS = False

USE_SECURE_URLS == True:

GRAFANA_SERVER = "https://" + LOGIN1  + ":29201"

JUPYTER = "https://" +   ":29204"

HUE = "https://" +   ":29202"

UAM = "https://" + ":29203/applications"

10. Update the 

/etc/httpd/conf.d/uam.conf

 configuration file as follows, replacing the URL

'

hostname-login1.us.cray.com

' with the FQDN of login node 1.

WSGISocketPrefix run/wsgi

WSGIScriptAlias / /opt/cray/ui-application-management/default/

application_management/apache/wsgi.py

Alias /static/ /opt/cray/ui-application-management/default/

application_management/app_monitoring/static/

<Directory /opt/cray/ui-application-management/default/application_management/

Security

S3016 

 

 233

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands