manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 100

Figure 23. Edit a Grafana Panel

6. Enter a title for the graph in the Title field of the General tab and optionally specify a span and/or height for

the graph.

7. Specify/select metrics using UI elements.

8. Optional: Click on the Axes & Grid and/or Display Styles tabs for specifying formatting options for the graph.

4.11 Start InfluxDB Before Hadoop Services

Prerequisites

This procedure requires root privileges. Before performing this procedure, use the 

urika-state

 command to

ensure that the system is operating in the service mode that supports using InfluxDB. For more information, see
the 

urika-state

 man page and refer to 

Urika-GX Service Modes

 on page 177.

About this task

If the Hadoop Cluster Metrics Grafana dashboard takes too long to populate, it may because the InfluxDB
service was started after Hadoop services. Follow the instructions documented in this procedure to troubleshoot
this issue.

System Monitoring

S3016 

 

 100

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands