nm [nm [unitid]]
iSCB Netmask (255.255.0.0).*
ns [ns]
iSCB NameServer IP address.*
ntp [host]
IP address of NTP server.*
ntpserver [host]
Hostname of NTP server. For example, time.nist.gov.*
passwd [pass]
set iSCB password.
polling [seconds]
polling interval.
port [port]
TCP port number of the CLI and Terminal Service. Default
is 7000.*
powerlimit [node
shelf]
The power usage limit of each blade and entire subrack.
Default is 0(off). For example, if the blade power usage
exceeds the power usage limit, iSCB will report a warning
event for the blade.
powermask
[blade(s)]
Define which blade(s) will not be affected by the power
reset/off/cycle commands.
reverse [on|off]
The direction of slot numbering order. If it is on, the node’s
slot number will be assigned from left to right. Default is off.
sdrscan [on|off]
?
shelf [type [cid
sid]]
Subrack type and cabinet/subrack ID. Type is one of
SR5110, SR6110, SR8104, SR8204, SR8202, SR10216.
Cabinet-ID is 0..127. Subrack-ID is 0..7.*
shelfname [name]
Subrack alias name. 14 chars max.*
shutdown [level]
Event level of shutdown. Default is off.
ssh [on|off]
If it is off, the ssh service will be blocked. Default is on.*
syslog [level
[logserver
[port]]
Event level and logserver IP of remote syslog. Level is one
of ‘critical’, ‘warning’ or ‘info’.*
telnet [on|off]
If it is off, the telnet login via TCP port 23 will be blocked.
Default is on.*
temp [warning
critical]
The temperature region of warning and critical. Default is
85’C and 90’C. For example, if the blade exceeds 85’C, the
blade health status is set to warning.
time
[YYYYMMDDhhmmss]
System time. Setting format is
[[[[[YY]YY]MM]DD]hh]mm[.ss].
trap [level
[community
[receiver]]]
Event level, community and receiver IP of SNMP Trap
notification. Default community is public.*
tz [timezone]
International time zone. Default is PST8PDT.*
* Run
nvram save
and
reboot
to apply changes to these parameters.
System Monitoring
S3016
120
