manualshive.com logo in svg

Cray Urika-GX, Administration Manual

Share
Download
Cray Urika-GX Administration Manual Download Page 189

# 

ifdown br1;ifdown enp7s0f1;ifup br1;ifup enp7s0f1

Sample contents of the generated 

/etc/sysconfig/network-scripts/ifcfg-br1

 file:

DEVICE=br1

TYPE=Bridge

BOOTPROTO=static

ONBOOT=yes

NM_CONTROLLED=no

IPADDR=172.30.51.152

NETMASK=255.255.240.0

GATEWAY=172.30.48.1

DNS1=172.30.84.40

DNS2=172.30.84.40

DOMAIN=us.cray.com

Sample contents of the generated 

/etc/sysconfig/network-scripts/ifcfg-enp7s0f1 

file:

NAME="enp7s0f1"

DEVICE="enp7s0f1"

ONBOOT=yes

BOOTPROTO=static

TYPE=Ethernet

NM_CONTROLLED=no

BRIDGE=br1

This creates a functional bridge required for the Urika-GX tenant management tools. For additional guidance,
refer to the 

README-install

 file, located under

the 

/opt/cray/urika-tenant-management/default/cluster-installer

 directory on the SMW.

7.5.2

Tenant Management

A number of processes are involved in tenant management, including creating, removing, modifying, viewing and
checking the status of tenants. In addition, tenant management also involves managing users associated with
tenants. These tasks are performed by a number of tenant management commands, as described in this section.

Tenant Creation

NOTE: Tenant creation can only be done when the system is operating in the secure service mode.
Before a tenant can be created, it is important to set up the 

br1

 interface. For more information, refer to 

Configure a Bridge Port

 on page 185.

Creating a tenant on Urika-GX is a two part process. First, the tenant configuration must be established in
the 

/etc/sysconfig/uxtenant

 directory, then the tenant VM needs to be created using the

ux-tenant-create

 command. Urika-GX ships with a sample configuration for a tenant named 

default

. While

default

 can be deployed on the system as-is, it is not deployed on Urika-GX when the system is shipped. Use

the 

default

 tenant's configuration as a template for setting up, configuring and naming a tenant as needed.

Tenant names may only contain:

●

the letters a-z

●

the numbers 0-9

●

the characters '

-

' and '

.

'

Security

S3016 

 

 189

Summary of Contents for Urika-GX

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands