Conair Carousel Plus UGD043-1216, User Manual

Page: 35 / 176

3
Installa
tion
I n s t a l l a t i o n l
3-11
Connecting the Dr yer to the Hopper
If your dryer hose connection and your hopper Heater Pack hose connection are not the
same size, you will need a hose adapter. Contact Conair Parts 1 800-458-1960.
Connecting the Dr yer to ResinWorks
If your dryer hose connection and the connection on your ResinWorks sled are not the
same size, you will need to use a hose adapter. Contact Conair Parts 1-800-458-1960.
NOTE: Because the W600 - 5000 models require a separate heat source for the delivery air,
all references to this heat source will be identified as a Heater Pack, or a Conair “HTC”
(Hopper Temperature Controller). When using this dryer with an HTC, reference the User
Guide supplied with the HTC for installation instructions.
✐
Mounting a Loader on the Hopper
If you have a Conair loader or vacuum receiver, you can use the flange and mounting clips
provided on the top of the hopper. Refer to the manuals that came with your specific
receiver or loader for detailed installation instructions.