5-10
l M a i n t e n a n c e
Cleaning the Aftercooler Coils
(continued)
5
Clean the assembly using a mild soap and water.
Let the assembly dry thoroughly
before installation.
NOTE:
In cases of heavy volatiles, steam cleaning, pressure washing or the use of solvents, such
as acetone, may be necessary. Be sure to test a small area with the solvent you have selected to
be sure there is no adverse reaction.
6
Inspect the condition of the gasket.
If it is damaged, replace the gasket.
7
Reassemble
by repeating the steps in reverse order.
8
Connect the water supply line and return lines.
9
Open valves to return water to the system.
✐
Draining the Volatile Drain
The volatile drain (if equipped) is located at the
back of the dryer.
1
Place a bucket or container below the
volatile drain valve at the back of the dryer.
2
Open the volatile drain valve.
Liquid should
begin to drain.
3
All the valve to completely drain.
This may
take a few minutes.
4
Close the drain valve.
5
Properly dispose of (in accordance with all regulations) the drained fluid.
Summary of Contents for Carousel Plus UGD043-1216
