B-6
l A p p e n d i x
Using Slip Tubes
Slip tubes can be used to achieve specific lengths of pipe without having to cut, weld, or
flange additional piping.
1
Roll the ring seal onto the slip tube.
2
Slide the standard
tube into the slip
tube to the
desired length.
3
Roll the ring seal back to the flange and
secure with a pull ring.
4
Tighten, alternating from one bolt (side) to
the other, the bolts to clamp the pull ring
around the flange.
Use a 6 mm hexagon
screwdriver and tighten the bolt to a maxi-
mum torque of 25 Nm.
NOTE:
Slip tube connections must
be secured against displacement.
For horizontally installed tubing,
tubes must be supported in the
area of the slip connection to pre-
vent sagging. The weight of the
vertical runs should also be sup-
ported at the first available horizon-
tal location, to keep joints from dis-
placing in vertical runs.
✐
IMPORTANT:
Slip tubes are not
meant to be used as telescoping
tubes. They are not designed to
be adjusted during operation.
NOTE:
The slip tube overlap must be at least
1.79 inches {45.5 mm} and at least 1.77 inches
{45.0 mm) of the tube must be above the flange
for proper operation. If ordering a slip tube to fit
into your hard pipe kit, be sure to order a length
that accommodates these allowances. For
example: do not order an 8 inch slip tube for a 7
inch gap, because the overlap will not be great
enough.
✐
To order a slip tube or
other parts for your
hard pipe kit, Conair’s
Instant Access 24/7
Parts and Service
number is
800-458-1960.
Outside the U.S., dial
814-437-6861.
Air Flow Direction
Air Flow Direction
Summary of Contents for Carousel Plus UGD043-1216
