Conair Carousel Plus UGD043-1216, User Manual

Page: 98 / 176

4-50
l O p e r a t i o n
(continued)
Stopping the Carousel Plus Dr yer
System
There are three (3) ways to stop the Carousel Plus Dryer with TouchView
TM
Technology:
•
Pressing the “System Cooldown” button
•
Pressing the “Stop System” button
•
Pressing the Emergency Stop switch
To stop the Carousel Plus Dryer System:
1
Stop the processing machine and stop taking material out of the hopper.
2
Navigate to the System Control Screen.
3
Press the "System Cooldown" button on the System Control Screen.
When the System Cooldown function is used, the heater will immediately be
turned off. The blower in the dryer will continue to run for the amount of time set
in the System Cooldown timer. The time can be set from 0 to
20 hours.
4
Disconnect and lock out the main power if you have stopped the dryer to
perform maintenance or repair.
CAUTION: Improper
shutdown can cause
damage to the
Carousel Plus Dryer
System and its com-
ponents.
NOTE: Set points boxes are
white with heavy black borders.
Set points can be changed, if
the user has logged in at the
proper security level, by press-
ing the set point boxes. This
will launch a pop-up keypad
window that can be used to
change the set point.
See
Operation section entitled,
Example Set Point Change.
After the new set point value
has been entered, press the
"Enter"
key to lock in the new
set point.
✐