5-12
l M a i n t e n a n c e
Cleaning the Precooler Coils
You need to clean the precooler coils to keep them working efficiently. Cleaning frequency
depends on the type and amount of material you process.
1
Stop the dryer and lockout the main power.
2
Turn off the water flow to the water supply and return lines.
Disconnect
supply and return lines.
3
Remove the bolts securing the precooler cover.
Remove the cover.
4
Remove the precooler by pulling it out
of the precooler housing.
5
Clean the assembly using a mild soap and water.
Let the assembly dry thoroughly
before installation.
NOTE:
In cases of heavy volatiles, steam cleaning, pressure washing or the use of solvents, such
as acetone, may be necessary. Be sure to test a small area with the solvent you have selected to
be sure there is no adverse reaction.
6
Inspect the condition of the gasket.
If it is damaged, replace the gasket.
7
Reassemble
by repeating the steps in reverse order.
8
Connect the water supply line and return line.
9
Open the valve to return water to the system.
✐
OFF
O
ON
I
Summary of Contents for Carousel Plus UGD043-1216
