4
Opera
tion
O p e r a t i o n l
4-51
Stopping the Carousel Plus Dr yer
System
(continued)
To stop the dryer using “System Stop”:
1
Stop the processing machine and stop taking material out of the hopper.
2
Navigate to the System Control Screen.
3
Press the "System Stop" button on the System Control Screen.
When the Stop System function is used, the heater will immediately be turned off.
The blower in the dryer will continue to run until the air entering the hopper cools
to 65.6°C {150°F} or until the ten (10) minute timer has expired.
NOTE:
If the operator presses
the “Stop System” button and
then decides use the System
Cooldown Function, the
“System Start” button will
have to be pressed, then the
“System Cooldown” button.
✐
NOTE:
If using ResinWorks,
refer to the user guide that
came with your equipment for
proper cool down procedures.
✐
To stop the dryer using “Emergency Stop”:
1
Press the “Emergency Stop” button
to immediately stop the dryer.
When the “Emergency Stop” button is pressed, the dryer immediately shuts
down. Air
DOES NOT
continue to circulate to cool down the material in the
system.
As soon as the reason for the emergency stop has been addressed,
the dryer should be restarted.
Emergency
Stop Button
Summary of Contents for Carousel Plus UGD043-1216
