6
Tr
ou
ble
sh
oo
tin
g
Tr o u b l e s h o o t i n g l
6-29
IMPORTANT
: Always refer
to the wiring diagrams that
came with your dryer to
locate specific electrical
components. Illustrations in
the User Guide are intended
to be representative only.
Checking Heater Solid State Relays
1
Disconnect and lockout the main power supply.
2
Open the electrical enclosure.
3
Locate the regeneration solid state relays.
Refer to the wiring diagrams that came
with your dryer.
4
Turn power on to the
machine.
5
Start the dryer.
6
Measure voltage across the high voltage connections using a voltmeter.
When
relay is energized, as indicated by the LED (green) voltage should be read 0 (zero).
When relay is de-energized, LED off, full voltage should be measured across the
relay. When relay is off, if voltage reads zero, relay is bad and needs replaced.
Repeat this procedure for each relay.
CAUTION:
Always disconnect and lock out the main power sources before
making electrical connections. Electrical connections should be made only by
qualified personnel.
✐
NOTE:
Measure voltage using a voltmeter across the two high voltage connections of each
relay. (Shown here circled in red.)
Regeneration heater
solid state relays
Process heater
solid state relays
OFF
O
ON
I
IMPORTANT
: Only qualified
personnel should take
measurements on energized
equipment. Follow all local,
regional, and company
guidelines regarding safe
electrical testing proce-
dures.
Summary of Contents for Carousel Plus UGD043-1216
