manualshive.com logo in svg

Compaq 2500 - ProLiant - 64 MB RAM, Reference Manual

The Compaq 2500 - ProLiant - 64 MB RAM manual, along with Integration Notes, is available for free download on our website. Discover detailed instructions, configuration settings, and troubleshooting tips to optimize your experience with this powerful product. Access the essential manual at manualshive.com today.

Share
Download
background image

6-7

SMART-2DH Array Controller Reference Guide

Writer: Pamela King   Project: SMART-2DH Array Controller Reference Guide    Comments: 295469-002

File Name: G-CH06.DOC   Last Saved On: 2/27/98 12:01 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Using Array Configuration Utility for
NetWare/intraNetWare
(CPQONLIN)

The Compaq Array Configuration Utility is an NLM that allows you to
configure your drive arrays without shutting down your server.
CPQONLIN.NLM is located in the ONLINE directory of Novell SSD Disk 1.
Load the NLM and follow the instructions on the screen to use this online
utility to configure your drive arrays.

NOTE

:     The Compaq Array Configuration Utility requires CPQDA386.DSK v

3.10 or later or CPQARRAY.HAM.

Optimizing Array Controller Performance

To increase the performance of your disk subsystem(s) under NetWare 4.x,
follow each of these steps before installing NetWare volumes or partitions.

■ 

If you selected a fault-tolerance option, such as mirroring or distributed
data guarding when using the Compaq System Configuration Utility,
do not select mirroring while using INSTALL.NLM. The fault-
tolerance capabilities of the SMART-2DH Controller provide
performance improvements and automatic data recovery features.

■ 

Novell recommends that you create volumes with a 64-KB block size
and that you use the Block Sub-Allocation feature of intraNetWare.
Using a large block size decreases the amount of RAM required to
mount the volume, while Block Sub-Allocation allows intraNetWare to
allocate disk space more efficiently.

■ 

Use of linear memory provides the best performance in the
intraNetWare environment. When you use the Compaq System
Configuration Utility to configure your server with intraNetWare, the
memory options default so that linear memory is used. To verify the
setting, run the Compaq System Configuration Utility and view the
Compaq Memory settings. Make sure that a linear option has been
selected under the Base Memory option.

Summary of Contents for 2500 - ProLiant - 64 MB RAM







































































































































































































Reviews:

No comments

Related manuals for 2500 - ProLiant - 64 MB RAM

Panasonic MICROCOMPUTER MN103S Connection Diagrams preview
MICROCOMPUTER MN103S
Brand: Panasonic Pages: 5
Panasonic MICROCOMPUTER MN103S Application Note preview
MICROCOMPUTER MN103S
Brand: Panasonic Pages: 21
Panasonic FP2 Series Manual preview
FP2 Series
Brand: Panasonic Pages: 56
Panasonic FP2 Series Product Manual preview
FP2 Series
Brand: Panasonic Pages: 28
Panasonic KX-HTS Series Quick Start Manual preview
KX-HTS Series
Brand: Panasonic Pages: 2
Panasonic WJMPU955 - PROCESSING UNIT - TMU Operating Instructions Manual preview
WJMPU955 - PROCESSING UNIT - TMU
Brand: Panasonic Pages: 62
Cabletron Systems Netlink FRX4000 Installation And Setup Manual preview
Netlink FRX4000
Brand: Cabletron Systems Pages: 8
Cabletron Systems 9C300-1 Upgrade Instructions preview
9C300-1
Brand: Cabletron Systems Pages: 4
Aleratec 310108 Quick Start Manual preview
310108
Brand: Aleratec Pages: 12
IAR SYSTEMS IAR KickStart Kit TWR-K60N512-IAR Getting Started Manual preview
IAR KickStart Kit TWR-K60N512-IAR
Brand: IAR SYSTEMS Pages: 8
Fracarro FRPRO EVO HD Quick Start Manual preview
FRPRO EVO HD
Brand: Fracarro Pages: 12
Multitech MultiConnect SE MTS2EA Specification Sheet preview
MultiConnect SE MTS2EA
Brand: Multitech Pages: 2
Cromemco 32K Bytesaver Instruction Manual preview
32K Bytesaver
Brand: Cromemco Pages: 46
Verizon Wireless PC 3220 Owner'S Manual preview
PC 3220
Brand: Verizon Wireless Pages: 39
Paradyne 7510 DSU Start-Up Instructions preview
7510 DSU
Brand: Paradyne Pages: 10
NC-link NC-AP111 User Manual preview
NC-AP111
Brand: NC-link Pages: 20
ICOP Technology Vortex86SX VSX-6100 User Manual preview
Vortex86SX VSX-6100
Brand: ICOP Technology Pages: 50
ZALMAN CNPS5X PERFORMA User Manual preview
CNPS5X PERFORMA
Brand: ZALMAN Pages: 8

Brands by name

Popular brands

Load more brands