manualshive.com logo in svg

Compaq 2500 - ProLiant - 64 MB RAM, Reference Manual

The Compaq 2500 - ProLiant - 64 MB RAM manual, along with Integration Notes, is available for free download on our website. Discover detailed instructions, configuration settings, and troubleshooting tips to optimize your experience with this powerful product. Access the essential manual at manualshive.com today.

Share
Download
background image

3-4

    

Updating the Firmware

Writer: Pamela King   Project: SMART-2DH Array Controller Reference Guide   Comments: 295469-002

File Name: D-CH03.DOC   Last Saved On: 2/27/98 11:26 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

6.  Review the information on the Caution screen:

Device to reprogram:

your server

Current ROM revision:

date of existing ROM version

Selected ROM revision:

date of ROM version to be installed

Press Enter to reprogram the system ROM or Esc to discontinue
reprogramming and return to the Select An Image screen.

7.  “Reprogramming Firmware” indicates that the system ROM is being

reprogrammed.  DO NOT INTERRUPT.

IMPORTANT:

     Do not interrupt this cycle.  Interrupting the ROM

reprogramming will leave the firmware in an unknown state.  You may not
be able to boot the server if this happens.  You will be notified that
reprogramming is completed.

8.  When ROMPaq is finished reprogramming the system ROM, press Esc

to exit the System ROMPaq Utility.

9.  Remove the System ROMPaq diskette and reboot the server by cycling

the power (cold boot).

If you have not yet installed your new SMART-2DH Controller, you may do
so at this time.

Running Option ROMPaq

Option ROMPaq is used to update the firmware on Compaq options. Use
Option ROMPaq to update the capabilities of the SMART-2DH Controller and
drives whenever an updated version is available in the future. Since it is
difficult to determine when to update the firmware, Compaq recommends that
you run the latest Option ROMPaq on all SMART-2DH Controllers whenever
it becomes available.

Summary of Contents for 2500 - ProLiant - 64 MB RAM







































































































































































































Reviews:

No comments

Related manuals for 2500 - ProLiant - 64 MB RAM

Lauterbach C2000 Manual preview
C2000
Brand: Lauterbach Pages: 61
Garland P1GCCAS Installation Manual preview
P1GCCAS
Brand: Garland Pages: 4
Zhone 6211 Quick Installation Instructions preview
6211
Brand: Zhone Pages: 1
JETWAY LI1B Series User Manual preview
LI1B Series
Brand: JETWAY Pages: 55
Dust Networks SmartMesh IA-510 D2511 Manager'S Manual preview
SmartMesh IA-510 D2511
Brand: Dust Networks Pages: 30
ZKTeco HVR0402 User Manual preview
HVR0402
Brand: ZKTeco Pages: 68
Xyclop XC-4CH-NVR-1TB User Manual preview
XC-4CH-NVR-1TB
Brand: Xyclop Pages: 144
Silvertel Ag102 User Manual preview
Ag102
Brand: Silvertel Pages: 9
Xenteq SR 200-12 User Manual preview
SR 200-12
Brand: Xenteq Pages: 16
Maxtor DiamondMax 8S Specification Sheet preview
DiamondMax 8S
Brand: Maxtor Pages: 2
ICP DAS USA I-87K Series User Manual preview
I-87K Series
Brand: ICP DAS USA Pages: 31
Ampro Corporation LITTLE BOARD P5X Hardware User Manual preview
LITTLE BOARD P5X
Brand: Ampro Corporation Pages: 121
Planet IPOE-171-60W User Manual preview
IPOE-171-60W
Brand: Planet Pages: 20
IBM 7311-D11 Removal And Replacement Procedures preview
7311-D11
Brand: IBM Pages: 74
Barracuda CloudGen Firewall Revision preview
CloudGen Firewall
Brand: Barracuda Pages: 8
Microchip Technology PD-9501-10GCO/AC User'S Installation Manual preview
PD-9501-10GCO/AC
Brand: Microchip Technology Pages: 41
Trend Micro R610 Series Quick Start Manual preview
R610 Series
Brand: Trend Micro Pages: 2
Rajant BreadCrumb ES1 User Manual preview
BreadCrumb ES1
Brand: Rajant Pages: 93

Brands by name

Popular brands

Load more brands