manualshive.com logo in svg

Compaq 2500 - ProLiant - 64 MB RAM, Reference Manual

The Compaq 2500 - ProLiant - 64 MB RAM manual, along with Integration Notes, is available for free download on our website. Discover detailed instructions, configuration settings, and troubleshooting tips to optimize your experience with this powerful product. Access the essential manual at manualshive.com today.

Share
Download
background image

D-21

SMART-2DH Array Controller Reference Guide

Writer: Pamela King   Project: SMART-2DH Array Controller Reference Guide    Comments: 295469-002

File Name: K-APPD.DOC   Last Saved On: 2/27/98 12:06 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Auto Reliability Monitoring

Auto reliability monitoring (ARM) is a background process that scans hard
drives for bad sectors in fault-tolerant logical drives. ARM also verifies the
consistency of parity data in drives with data guarding or distributed data
guarding. This process assures that you can recover all data successfully if a
drive failure occurs in the future. ARM operates only when you select
RAID 1 , RAID 4, or RAID 5.

Dynamic Sector Repairing

Using the dynamic sector repairing process, the controller automatically
remaps any sectors with media faults it detects either during normal operation
or during auto reliability monitoring.

Drive Parameter Tracking

Drive parameter tracking monitors more than 15 drive operational parameters
and functional tests. This includes parameters such as read, write, and seek
errors, spin-up time, cable problems, and functional tests such as track-to-
track seek time, one-third stroke, and full stroke seek time. Drive parameter
tracking allows the SMART-2DH Controller to detect drive problems and
predict drive failure before they actually occur. It also makes pre-failure
warranty possible on Compaq disk drives.

Drive Failure Alert Features

Drive failure features produce various drive alerts or error messages
depending on the Compaq server model. Refer to the documentation included
with your server to determine what drive failure features are included on your
server model.

Other Compaq options such as Compaq Insight Manager and Compaq Server
Manager/R provide additional drive failure features. See your Authorized
Compaq Reseller for more information on these products.

Summary of Contents for 2500 - ProLiant - 64 MB RAM







































































































































































































Reviews:

No comments

Related manuals for 2500 - ProLiant - 64 MB RAM

Canon C50FSi - VB Network Camera Setup Manual preview
C50FSi - VB Network Camera
Brand: Canon Pages: 32
Rabbit 2000 Reference Manual preview
2000
Brand: Rabbit Pages: 120
Xilica Audio Design neutrino series Quick Start Manual preview
neutrino series
Brand: Xilica Audio Design Pages: 26
Teac HD-35NAS User Manual preview
HD-35NAS
Brand: Teac Pages: 20
Maple Systems cMT-FHDX Series Installation Instruction preview
cMT-FHDX Series
Brand: Maple Systems Pages: 2
NETGEAR Powerline 100 Installation Manual preview
Powerline 100
Brand: NETGEAR Pages: 2
SIIG ID-P20211-S1 Quick Installation Manual preview
ID-P20211-S1
Brand: SIIG Pages: 20
JETWAY HBJC924R3288DG2NS Series Quick Installation Manual preview
HBJC924R3288DG2NS Series
Brand: JETWAY Pages: 6
Belden HIRESCHMANN IT MAMMUTHUS MTM8003-FAN User Manual preview
HIRESCHMANN IT MAMMUTHUS MTM8003-FAN
Brand: Belden Pages: 84
OWC Mercury FireWire 400 Owner'S Manual preview
Mercury FireWire 400
Brand: OWC Pages: 2
SSV Embedded Systems eSOM/3517 Hardware Reference Manual preview
eSOM/3517
Brand: SSV Embedded Systems Pages: 17
Ampro Corporation LITTLE BOARD P5X Hardware User Manual preview
LITTLE BOARD P5X
Brand: Ampro Corporation Pages: 121
Planet IPOE-171-60W User Manual preview
IPOE-171-60W
Brand: Planet Pages: 20
Digi 9P 9360/9750 User Manual preview
9P 9360/9750
Brand: Digi Pages: 75
Optus Ultra WiFi Booster Quick Manual preview
Ultra WiFi Booster
Brand: Optus Pages: 8
Cowlacious Designs ISD CAP 275 Manual preview
ISD CAP 275
Brand: Cowlacious Designs Pages: 8
audemat DIGIPLEXER 246 User Manual preview
DIGIPLEXER 246
Brand: audemat Pages: 93
Alphacool NexXxoS GPX-N 1070-M08 Instruction Manual preview
NexXxoS GPX-N 1070-M08
Brand: Alphacool Pages: 4

Brands by name

Popular brands

Load more brands