Compaq 2500 - ProLiant - 64 MB RAM Reference Manual Download Page 96

Page: 96 / 198

6-28

Installing the Operating System Drivers

Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002

File Name: G-CH06.DOC Last Saved On: 2/27/98 12:01 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

10. Later during Windows NT installation, reinsert the Windows NT SSD

diskettes when prompted. The Setup program will copies the drivers to
the system.

11. Finish installing Windows NT.

Installing the Compaq SMART-2DH Controller
Driver after Windows NT Installation

Execute the Setup program in the root directory of the Windows NT Support
Software Diskette utility to install or update the driver. This installation
program will copy the appropriate driver and configure the system to use this
driver.

1. Start Windows NT 3.51 or NT 4.0 and log in to an account with

administrative privileges.

2. Insert the Windows NT SSD diskettes, one at a time, into the diskette

drive.

3. From the Program Manager, select File

Run.

4. Enter the following:

A:\setup

5. The Setup program presents a list of drivers that can be installed.

Select Compaq SCSI Controllers Support - Install/Remove.

6. Select Continue. In the SCSI Adapter Setup window, select Add. A

Setup dialog box will be displayed asking you to confirm the addition
of a SCSI controller (adapter). Select OK.

7. Scroll through the Adapter list and select Other.

8. When prompted for the path to the SCSI Adapter files, enter:

A:\scsi\array

Select Continue.

9. Select Compaq Drive Array from the list of drivers to install. Select OK.

Summary of Contents for 2500 - ProLiant - 64 MB RAM







































































































































































































Search results

Summary of Contents for 2500 - ProLiant - 64 MB RAM

Reviews:

Related manuals for 2500 - ProLiant - 64 MB RAM

Brands by name

Popular brands

Compaq 2500 - ProLiant - 64 MB RAM, Reference Manual

Search results

Summary of Contents for 2500 - ProLiant - 64 MB RAM

Reviews:

Related manuals for 2500 - ProLiant - 64 MB RAM

Brands by name

Popular brands