manualshive.com logo in svg

Compaq 2500 - ProLiant - 64 MB RAM, Reference Manual

The Compaq 2500 - ProLiant - 64 MB RAM manual, along with Integration Notes, is available for free download on our website. Discover detailed instructions, configuration settings, and troubleshooting tips to optimize your experience with this powerful product. Access the essential manual at manualshive.com today.

Share
Download
background image

v

SMART-2DH Array Controller Reference Guide

Writer: Pamela King   Project: SMART-2DH Array Controller Reference Guide   Comments: 295469-002

File Name: A-FRNT.DOC   Last Saved On: 4/1/98 1:31 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Chapter 6

Installing the Operating System Drivers

Novell NetWare/intraNetWare ........................................................................................... 6-2

Materials Needed ........................................................................................................ 6-2
Creating Novell SSD Diskettes.................................................................................... 6-2
Additional Information................................................................................................ 6-3
Installing the Driver .................................................................................................... 6-4
Updating the Compaq Insight  Manager Agents .......................................................... 6-5
Using Array Configuration Utility for NetWare/intraNetWare (CPQONLIN).............. 6-6
Optimizing Array Controller Performance................................................................... 6-6
Using the Compaq Drive Array Optimization Utility (CPQDAOPT) ........................... 6-7
Software Drive Mirroring  with NetWare/intraNetWare .............................................6-10
Handling Disk Drive Failures .....................................................................................6-11

Microsoft Windows NT.....................................................................................................6-19

Materials Needed .......................................................................................................6-19
Creating the Windows NT SSD Diskettes...................................................................6-19
Additional Information...............................................................................................6-20
Installation Procedures ...............................................................................................6-21
Updating the Compaq Insight  Manager Agents .........................................................6-27

SCO OpenServer 5............................................................................................................6-28

Getting the Driver and  Installation Information .........................................................6-28
Materials Needed .......................................................................................................6-28
Creating the EFS Diskettes.........................................................................................6-29
Accessing the Information..........................................................................................6-29
Updating the Compaq Insight  Manager Agents .........................................................6-30

SCO UnixWare 2.1 or Later..............................................................................................6-31

Getting the Driver and  Installation Information .........................................................6-31
Materials Needed .......................................................................................................6-31
Creating the EFS Diskettes.........................................................................................6-31
Accessing the Information..........................................................................................6-32
Updating the Compaq Insight  Manager Agents .........................................................6-32

Summary of Contents for 2500 - ProLiant - 64 MB RAM







































































































































































































Reviews:

No comments

Related manuals for 2500 - ProLiant - 64 MB RAM

Dave Embedded Systems ARM Cortex-A9 MPCore Quick Start Manual preview
ARM Cortex-A9 MPCore
Brand: Dave Embedded Systems Pages: 67
LaCie d2 Network 2 Quick Install Manual preview
d2 Network 2
Brand: LaCie Pages: 44
LaCie LaCie Ethernet Disk Datasheet preview
LaCie Ethernet Disk
Brand: LaCie Pages: 2
LaCie SATA II ExpressCard 34 Datasheet preview
SATA II ExpressCard 34
Brand: LaCie Pages: 2
LaCie 12big Rack Fibre 8 Quick Install Manual preview
12big Rack Fibre 8
Brand: LaCie Pages: 9
Allnet ALL1682504 Quick Installation preview
ALL1682504
Brand: Allnet Pages: 12
Telebyte 458-LM-E2-36 Quick Start Manual preview
458-LM-E2-36
Brand: Telebyte Pages: 19
RuggedCom RUGGEDMAX WIN7000 Installation Manual preview
RUGGEDMAX WIN7000
Brand: RuggedCom Pages: 42
Cypress Semiconductor CY62148E Specification Sheet preview
CY62148E
Brand: Cypress Semiconductor Pages: 10
Renesas RL78/G11 User Manual preview
RL78/G11
Brand: Renesas Pages: 2
National Instruments SCXI-1120 User Manual preview
SCXI-1120
Brand: National Instruments Pages: 130
Meinberg CPU-C15G2 Setup Manual preview
CPU-C15G2
Brand: Meinberg Pages: 14
AMD Geode LX 800 User Manual preview
Geode LX 800
Brand: AMD Pages: 27
EXAGATE SYSGuard 6001 Quick Installation Manual preview
SYSGuard 6001
Brand: EXAGATE Pages: 7
Delta AH10EN-5A Series Operation Manual preview
AH10EN-5A Series
Brand: Delta Pages: 132
Alphacool NexXxoS GPX-N 1070-M08 Instruction Manual preview
NexXxoS GPX-N 1070-M08
Brand: Alphacool Pages: 4
QSC Q-SYS QIO-GP8x8 Hardware User Manual preview
Q-SYS QIO-GP8x8
Brand: QSC Pages: 13
ADLINK Technology AMC-7000 User Manual preview
AMC-7000
Brand: ADLINK Technology Pages: 34

Brands by name

Popular brands

Load more brands