Compaq 2500 - ProLiant - 64 MB RAM Reference Manual Download Page 37

Page: 37 / 198

4-3

SMART-2DH Array Controller Reference Guide

Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002

File Name: E-CH04.DOC Last Saved On: 2/27/98 11:28 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Running the System
Configuration Utility

To run the System Configuration Utility:

1. Place the Compaq SmartStart and Support Software CD in the server

CD-ROM drive.

Place the System Configuration Utility diskette 1 in the server
floppy drive.

2. Reboot the server.

3. During the boot process, several messages are displayed. Among these

will be a notice that one or more SMART-2DH Controllers were
detected in option slots, and a recommendation to run the System
Configuration Utility.

4. If prompted, press F1 to resume booting.

5. If you are using the Compaq SmartStart and Support Software CD,

select Run the System Configuration Utility from the main menu
screen.

6. If you are given a choice of Auto Configuration, choose Yes.

7. The system loads configuration files for all detected devices.

8. In the Configuration Complete screen, be sure to choose Review or

modify hardware settings.

9. From the next screen, Steps In Configuring Your Computer, select

Step 3: View or edit details.

10. The View Or Edit Details screen is where you will set the SMART-

2DH Controller(s) configuration parameters. Scroll down to the option
slot for the first SMART-2DH Controller and edit each parameter
according to the following information.

Summary of Contents for 2500 - ProLiant - 64 MB RAM







































































































































































































Search results

Summary of Contents for 2500 - ProLiant - 64 MB RAM

Reviews:

Related manuals for 2500 - ProLiant - 64 MB RAM

Brands by name

Popular brands

Compaq 2500 - ProLiant - 64 MB RAM, Reference Manual

Search results

Summary of Contents for 2500 - ProLiant - 64 MB RAM

Reviews:

Related manuals for 2500 - ProLiant - 64 MB RAM

Brands by name

Popular brands