4-7
SMART-2DH Array Controller Reference Guide
Writer: Pamela King Project: SMART-2DH Array Controller Reference Guide Comments: 295469-002
File Name: E-CH04.DOC Last Saved On: 2/27/98 11:28 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
16 MEG
4 MEG
Figure 4-1.
Array Accelerator switch positions
2. Review and edit the Controller Characteristics of all other SMART-
2DH Controllers shown in the View or Edit Details screen, as
described in Step 11 above.
3. Press
F10 when finished editing the View or Edit Details screen.
4. Select Step 5: Save and Exit on the Steps in Configuring Your
Computer screen.
5. Choose Save The Configuration and restart the computer on the Save
and Exit screen.
6. Press
Enter at the Reboot screen.
7. Remove the CD or System Configuration diskette and verify that the
server will boot normally without POST errors.
System hardware configuration is complete. Proceed to Chapter 5, “Running
the Array Configuration Utility,” to configure drive arrays.
