manualshive.com logo in svg

Compaq 2500 - ProLiant - 64 MB RAM, Reference Manual, Page: 150 / 198

Share
Download
Compaq 2500 - ProLiant - 64 MB RAM Reference Manual Download Page 150

D-17

SMART-2DH Array Controller Reference Guide

Writer: Pamela King   Project: SMART-2DH Array Controller Reference Guide    Comments: 295469-002

File Name: K-APPD.DOC   Last Saved On: 2/27/98 12:06 PM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

Daz-9-13.EPS

Original
Logical
Drive

Added
Physical
Drives

Figure D-10.

    Begin Capacity Expansion by adding more physical drives

When initiated by the Array Configuration Utility, the SMART-2DH
Controller will automatically redistribute the data in the original logical drive
to a logical drive that spans all of the physical drives in the array, including
the added drives. The room left over is used to create additional logical drives,
also spanning all physical drives. Both logical drives are then included in the
drive array with expanded storage capacity. See Figure D-11.

Summary of Contents for 2500 - ProLiant - 64 MB RAM







































































































































































































Reviews:

No comments