manualshive.com logo in svg

Compaq 2500 - ProLiant - 64 MB RAM, Reference Manual, Page: 39 / 198

Share
Download
Compaq 2500 - ProLiant - 64 MB RAM Reference Manual Download Page 39

4-5

SMART-2DH Array Controller Reference Guide

Writer: Pamela King   Project: SMART-2DH Array Controller Reference Guide   Comments: 295469-002

File Name: E-CH04.DOC   Last Saved On: 2/27/98 11:28 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

If you want the order of the integrated SCSI controller to be something
other than Second, scroll (usually down) to the Embedded Compaq
Integrated Controller and set the Controller Order manually, as
described above.

When installing a SMART-2DH Controller in a system with an
existing array controller, you can either place the new controller at the
end of the controller order or reorder the controllers. Reordering
changes the current drive letter assignments for all drives on the
system. To avoid changing the drive letter assignments, place the new
controller at the end of the controller order and do not create a primary
partition on any of the added disks.

Online Recovery Server Status
This function indicates whether the SMART-2DH Controller is able to
participate in Online Recovery and is available only in Advanced
Features (Ctrl+A at the main menu).

Select:
Disabled 

Online recovery is disabled

Primary 

SMART-2DH Controller manages the local storage

device.
Recovery 

SMART-2DH Controller is able to adopt a storage  device

from another system that has had an online recovery

event occur.

PCI Memory Overlay Setting
This function indicates whether the allocated memory associated with
multiple SMART-2 Array Controllers is overlaid or not.

NOTE

:     This feature is not compatible with Windows NT. For Windows NT,

PCI Memory Overlay should be set to No Overlay.

This feature is available in Advanced Features (Ctrl + A at the main
menu). This feature applies only to systems that:

❏ 

Contain more than 3 GB of RAM

❏ 

Contain more than one SMART-2 controller

Summary of Contents for 2500 - ProLiant - 64 MB RAM







































































































































































































Reviews:

No comments