manualshive.com logo in svg

Compaq 2500 - ProLiant - 64 MB RAM, Reference Manual, Page: 26 / 198

Share
Download
Compaq 2500 - ProLiant - 64 MB RAM Reference Manual Download Page 26

2-8

    

Guidelines for Making Changes to Current Installation

Writer: Pamela King   Project: SMART-2DH Array Controller Reference Guide    Comments: 295469-002

File Name: C-CH02.DOC   Last Saved On: 2/27/98 11:25 AM

COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED

3.  Power system ON. A 1727 POST message should indicate that logical

drives were added to the configuration. If the system comes up with a
1785 (Not Configured) POST message, turn the system off
immediately to avoid data loss and return the drives to their original
locations.

NOTE

:  

 

If you move arrays from a dual-channel controller to a single-

channel controller, you may get an error message indicating a configuration
error. If you get this error message:

❏ 

Return to the previous dual-channel controller configuration.

❏ 

Back up data on the array.

❏ 

Move the drives to the single-channel controller.

❏ 

Run Array Configuration Utility on the single-channel controller to
configure the array.

❏ 

Restore data to the array.

4.  Run Array Configuration Utility to view the new drive configuration or

to assign spare drives (optional).

Summary of Contents for 2500 - ProLiant - 64 MB RAM







































































































































































































Reviews:

No comments