Eclipse
|
Upgrade Guide
Page 29
Order System component
Upgrade procedure(s)
Notes
matrix audio monitoring and
control is required.
Table 3-4: Procedures for upgrading from Eclipse HX v7.5 to Eclipse HX v9.1
3.5
Upgrading from 7.6
The following table lists the procedures that you will require to upgrade from Eclipse HX v7.6 to Eclipse HX v9.1.
Important note:
The table lists the procedures in the order in which they
must
be carried out.
To go to a procedure, click the cross-reference / link
.
Order System component
Upgrade procedure(s)
Notes
1
E-QUE card
IVC-32 card
LMC-64 card
9.1 Identifying MK1 and MK2 E-QUE cards
9.2 Upgrading the E-QUE card (MK1)
9.3 Upgrading the E-QUE card (MK2)
The procedures used to upgrade
E-QUE cards to Eclipse HX v9.1
can also be used to upgrade IVC-
32 and LMC-64 cards.
No PROM upgrade is required
2
E-MADI64 card
11.3 Upgrading the E-MADI64 application, DSP and FPGA code
using EHX
11.4 Upgrading the E-MADI64 FPGA using the Xilinx tool set
No DSP upgrade required.
(Note
–
if the E-MADI64 card
is upgraded before the CPU
Card then there is no E-MADI
card LED activity during the
upgrade. See E-MADI64
section for important upgrade
information).
