Eclipse
|
Upgrade Guide
Page 187
Note:
For correct connector orientation, the wires must exit the plug on the top side as
shown.
3.
Power up the TEL-14.
4.
Start Flash Magic. Configure the following settings for the
5 purple numbered
boxes
in the Flash Magic dialog:
Box
Setting(s) to enter
1
The COM port to which you are connected.
Baud Rate:
2400
Device:
89LPC935
Oscillator Frequency:
3.5795 MHz
2
Select
Erase blocks used by Hex File
3
Enter the name of the file (
710756Z .hex)
to be loaded, or
use Browse to locate the file.
4
Ensure all boxes are clear
5
Do
not
press
Start
.
Table 15-2: FlashMagic settings
Figure 15-4: FlashMagic configuration dialog
5.
In the menu options along the top of the Flash Magic dialog, select
ISP
(second
option from the left).
