Eclipse
|
Upgrade Guide
Page 122
c.
Select the FPGA image for the fourth device, the networking FPGA Flash.
Go to
Drivers USB > ECLIPSE DRIVERS > Omega-Median-Delta > xxxxxx-Fibre
Networking (rear)
FPGA
(where
xxxxxx
represents the product number).
The folder contains the FPGA file (
*.mcs
format) and a
Read M
e file (
*.txt
), which
contains version information.
9.
A summary dialog is presented. For the FPGA Flash device(s), ensure that the
Erase Before Programming
and
Verify
flags are set. Click
OK
.
Figure 8-2: Example Xilinx device programming properties
10.
The upgrade (programming) starts, and takes approximately 2 minutes to
complete. When the upgrade is complete, the
Program Succeeded
message is
displayed in the main window.
11.
Power down the UUT.