Eclipse
|
Upgrade Guide
Page 62
Figure 5-6: Tera Term: selecting Serial port
4)
From the
Setup
menu, select the
Serial port…
entry.
5)
The
Serial port
configuration dialog is displayed. Configure the serial port as
follows:
Field
Data (to enter / select)
Port
Com1
Note:
Change as required to match a COM port on the PC.
Baud Rate
115200
Parity
Even
Stop
One (bits)
Data
8 (bits)
Table 5-4: Tera Term: Serial port configuration
Tip:
You can use the Tera Term application for many of the Eclipse HX system
upgrade processes. To save and recall the relevant com port settings in Tera
Term, select the
Setup / Save
or
Restore settings
options.
6)
Connect the PC serial port to the RS232 port on the rear of the Eclipse HX-
Median / Eclipse HX-Omega / Eclipse HX-Delta matrix, using the RS232 cable.
7)
Remove
both
CPU cards from the matrix. Power on the Eclipse HX-Median /
Eclipse HX-Omega / Eclipse HX-Delta matrix.
8)
Erase the old application code from the CPU cards.
