Eclipse
|
Upgrade Guide
Page 167
Figure 14-2: Example wiring scheme for i-Station serial programming
shows an alternative cabling scheme that does not require the use of the
RS-422 converter module:
Figure 14-3: Alternate example wiring scheme for i-Station serial programming
Note:
The cabling scheme shown supports i-Station panels. To use with an E-station simply
reverse the TX and RX connections at the Sub-D 9-pin F connector.
Tip:
An i-Station or E-station with either no firmware installed or corrupted firmware
may be repaired through an upgrade (the station will display
Display Module Test,
Press All Buttons 3X
).
To manually upgrade the i-Station panel application code:
