Eclipse
|
Upgrade Guide
Page 181
Figure 14-20: TFTPUtil settings
9.
If a firewall is running it may request permission for the program to have access
when the TFTP server is run for the first time. Click
Yes
. Click
OK
and
OK
again.
10.
Check that your PC IP address is correctly displayed on the main header of the
TFTP application:
Figure 14-21: Checking the PC IP address
11.
Connect an Ethernet cross-over cable from the PC to the Ethernet port at the
back of the V-series panel and disconnect the cable that connects to the matrix.
Your PC is now ready to act as a file server to a V-series panel and the panel is
now ready to be told which files to upload.
12.
To upgrade the
V-Series U-Boot Loader
:
a.
Press and hold down both the
MAIN
and
AUX
knobs on the V-Series Panel
while applying a reset.
The reset may be applied by either power cycling the panel or poking a
paper clip into the reset hole between the
H/S
and
MENU
buttons.
