Engine System Centaur Service Manual
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
EN-42
27. Mount the emergency brake cable to the bracket of the engine cover support using the
“U” bolt mounting bracket.
Photo EN-99
28. Reattach the emergency brake cable to the cam with the clevis pin and a
new
cotter
pin.
Photo EN-100
29. Slip the antifreeze overflow bottle and cap back into it’s mounting bracket on the rear
of the firewall. Photo
EN-101
30. Perform the servicing procedure,
Installing the Radiator
, on page EN-16 or EN-19
depending on the model of CENTAUR being serviced.
EN-100
EN-101
EN-99
EN-102
36. Install the rear transmission guard.
Photo EN-102
37. Add approximately 3.3 litres of oil to the engine using the recommended oil chart on
page EN-11.
38. Reconnect the battery wiring.
39. Start the engine and run it until the thermostat opens.(When the coolant level drops,
the thermostat is open). Check coolant level and add as required.
Summary of Contents for 2001 950
