Steering System
Centaur Service Manual
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
Supplement Pages
Steering System
Centaur Service Manual
ST-6(A)
1. Remove the outside retaining ring on the steering shaft at the steering column.
Photo ST-1
On vehicles manufactured from S/N 0301191:
Disassembling the Steering Column
2. Slip the washer and O-ring from the steering shaft.
Photo ST-2
ST-1
ST-2
3. Pull the steering shaft from the columns welded steering tube.
Photo ST-3
4. There are 2 oilite bushings press fit to each end of the steering tube. Remove and replace if necessary.
Photo ST-4
ST-3
ST-4
Assembling the Steering Column
1. Press fit an oilite bushing into each end of the steering tube at the steering column.
Photo ST-5 & 6
2. Install the steering shaft assembly through the tube of the steering column.
Photo ST-7
5. Continue from step 17 through 19 on page ST-8 for further disassembly of master cylinder, throttle/
brake support brackets and gas pedal if necessary.
Summary of Contents for 2001 950
