Vehicle Bodies
Centaur Service Manual
Vehicle Bodies
Centaur Service Manual
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
Supplement Pages
Assembling the Door Latch Assembly
1. Install the latch trim plate with the four studs on the outside of the door, pushing the
studs through the fabric and the latch mounting plate.
Photo VB-7
Install the door
latch with the angled latching slide nearest the door frame and secure in place with
the star-lockwasher/nut combinations
. Photo VB-8
VB-7
VB-8
Install the door.
2. From inside the cab, remount the door catch plate against the inside face of the
ROPS member. Secure with the 2 fasteners
.
Apply a little blue 242 LOCTITE to
the threads
. Photo VB-9
1. Hang the door to the vehicle by connecting it at the hinge assemblies. Check that it
swings freely and that the weather seal sits evenly all around the door opening when
in the closed position.
Do not over-tighten fasteners to the ROPS.
VB-9
3. The door should latch closed when re-
leased from a position of approximately
one foot open. If it does not, adjust the
door catch plate until it does.
4. Once the door latches closed and swings
freely when opened, re-check that the
weather seal sits tightly against the face
of the cab.
VB-16(A)
Summary of Contents for 2001 950
