Transmission Centaur Service Manual
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
TR-70
Be sure that the steering lever bracket that is attached to the Upper Frame Cross
Brace Assembly, does not come into contact with the lever and spring assembly. Be
sure to set a gap of 1/8” between the two. Steering can become impaired if these
grate against each other.
Photo TR-373
6. Reattach the steering cable linkage at the lever using the clevis pin and a
new cotter
pin. Photo
TR-374
7. Reinstall the left and right hand side transmission guards.
Photo TR-375
8. Secure the hydraulic brake caliper to the transmission being careful not to kink or twist
the attached brake line in any way.
Photo TR-376
9. Perform the servicing procedure,
Drive Chain Installation
on page WA-8
TR-371
TR-372
TR-373
TR-374
IMPORTANT
Summary of Contents for 2001 950
