Centaur 2001 950, Service Manual

Page: 35 / 450

Centaur Service Manual Engine System
Ontario Drive & Gear Limited. www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
EN-11
Oil, Filter And Lubrication Information
ENGINE OIL INFORMATION
Checking the Engine Oil Level
To check the oil during an operating period, shut the engine off, let it cool down and allow
the oil time to drain into the sump before checking the oil level. Position the vehicle so the
engine is level.
The BRIGGS & STRATTON DAIHATSU engine is equipped with a dipstick and a separate
oil filler cap. To check the oil level, clean the area around the dipstick before removing.
Remove the dipstick and wipe it with a clean cloth. Re-insert the dipstick and push it all
the way into the tube. Remove the dipstick and check the oil level. The oil level should be
between the marks. If the level has dropped, add oil to bring the level up to the “F” mark.
DO NOT OVERFILL.
Photo Below
Do not run the engine if the oil level is above the
“F” mark or below the “L” mark. Premature
engine damage or total engine failure can occur
when the oil level is not properly maintained.
Recommended Engine Oil
Use a high quality detergent oil of API
(American Petroleum Institute) service class
as listed here. Choose the correct viscosity of
oil for seasonal driving conditions. For the
gasoline powered Centaur, use API service
class “SH” or “SJ” or higher. For diesel
powered Centaur, use API service class “CF”
or “CF-4”.
Oil capacity is approximately 3.3 litres, including the oil filter.