Centaur 2001 950, Service Manual, Page: 111 / 450

Electrical System Centaur Service Manual
ES-26
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
ES-27
Centaur Service Manual Electrical System
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
Electrical System Centaur Service Manual
3. Upon releasing the contact, the LED will begin flashing digits starting from the right.
The first digits will be
.00
As long as the contact remains unpressed, the digits will
blink 4 times then move on to the next number. Leave the first set of digits at
.00
and
wait until the “5” of the 75.0 begins to flash.
Photo ES-38
4. Press and hold the contact until this number changes to a “6” and release. Photo ES-
39
5. When the 7 begins to flash press the contact and hold until the number changes to 0,
then release. Photo ES - 40
6. Let the calibration run the rest of it’s course and wait until the final setting reads
0.0
Photo ES-41
7. Tachometer is now calibrated correctly.
ES-38 ES-39
ES-40 ES-41