Engine System Centaur Service Manual
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
EN-40
17. Connect the temperature gauge sensor wire (Pink/red stripe), and the temperature
warning light wire (red/white stripe)
Photo EN-91
18. Tie-wrap all wiring as necessary to keep away from any hot or moving components.
Installing The Hydrostatic Pump Drive Belt
19. Before installing the Poly Chain belt between pump and engine, make sure that the
pump has been pried towards the engine.
20. Slip the poly chain belt over the hydrostatic pump’s belt sprocket and the sprocket of
the engine.
Photo EN-92
21. Adjust the belt by prying the pump away from the engine and torque down both bolts
of the bridge blocks. Tension the belt so that 6lbs. of force causes a deflection of .21”
at a point midway between the 2 pulleys.
*Use a fish scale to measure force.
Photo
EN-93
22. Reinstall the engine cover support using the specified 4 bolts and lock washers.
Photo EN-94
EN-91
EN-92
EN-94
EN-93
Summary of Contents for 2001 950
