Wheels, Axles & Chains
Centaur Service Manual
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
Centaur Service Manual
Wheels, Axles & Chains
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
Wheels, Axles & Chains
Centaur Service Manual
WA-25
17. Remove the inner bearing races from both ends of the housing. Using a long punch and
hammer, tap the races from behind through the machined notches within the housing
cover.
Photo WA-43
WA-42
WA-43
18. Using an arbor press, remove the tapered bearing from the inner axle 17T spline,
sprocket side of the axle.
Photo WA-44
19. Remove the oil V ring seal from the wheel hub.
Photo WA-45
WA-44
WA-45
Axle Reassembly
1. Install a new oil V ring seal to the axle hub
Make sure that the seal is properly seated to the shoulder of the axle wheel assembly.
Photo WA-46
21. Refer to the servicing procedure,
Removing The Steel Sleeves From Sprockets/ Wheel
Hubs,
to replace the wheel hub sleeve if necessary. Page TR-27
20. Inspect and replace parts as necessary, always using new seals and dust covers.
IMPORTANT
Summary of Contents for 2001 950
