Centaur 2001 950, Service Manual

Page: 62 / 450

Engine System Centaur Service Manual
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
EN-38
Blue Wire to #3 coil (terminal closest to firewall) then yellow ignition wire. Orange
wire to #2 coil (terminal closest to firewall) then yellow ignition wire. Red wire to the
#1 coil (terminal closest to firewall) then yellow ignition wire. Photo EN-83
EN-83
EN-84
10. On the
diesel
model engine, reconnect the preheat wire (Red) and light indicator sen-
sor wire ( white/red stripe) to the top of the glow plugs as in Photo EN-84
11. Isolate the conduit sleeving with the purple wire, which connects to the oil pressure
switch. Slip the green wire from the fuel shutoff switch on the carburetor, through this
same conduit and connect at the main engine harness.
Photo EN-85
12 . Reconnect the purple/white stripe wire to the oil pressure switch. Photo EN-86
13. Connect the 6 gauge power wire at the starter post and cover with the rubber boot.
Photo En-87
EN-85
EN-86