Steering System
Centaur Service Manual
ST-14
Centaur Service Manual
Steering System
Ontario Drive & Gear Limited www.centaur8x8.ca
(519) 662-2840 FAX (519) 662-2421
ST-14
ST-15
ST-37
ST-36
ST-35
ST-38
3. Pop the shock from the ball stud with a quick blow from behind with your hand.
Photo
ST-38
4. Remove the retaining ring securing the arm rest assembly to the pivot point and slide
it from the shaft to free it from the vehicle.
Photo ST-39 & 40
ST-39
ST-40
5. Disconnect the lower part of the shock from the arm rest assembly in the same manner
as the previous end that was removed at the ROPS. Remove the locking clip and pull
the shock from the ball mount.
Photo ST-41
2. With the gear shift in neutral, start engine and allow to idle at 1000 rpm. Loosen the
steering spring centering plate located under the ROP’S cross tube (under the seat and
adjust to the left or right until the wheels stop moving.
Steering Lock Adjustment
Summary of Contents for 2001 950
