Carrier i-Vu CCN Pro 4.2 Installation Manual Download Page 74

Page: 74 / 104

Monitor and control equipment

i-Vu CCN Pro 4.2

Description

Column Name

Data type

Alarm generation time

EVENT_TIME_

Datestamp

Path to the alarm source

Example: #slm/m073

SOURCE_PATH_

String

Display name path to the alarm source

Example: Atlanta Office/R&D Facility/Second Floor/VAV 2-

1/Zone Temp

DISPLAY_NAME_

String

Alarm state

Example: OFF NORMAL, LOW LIMIT, HIGH LIMIT

EVENT_STATE_

String

Alarm text as defined in the

Text to write to the database

field on

the alarm action page. You can add live data to the text by

selecting field codes from the

Append Field Code list

RA_TEXT_

String

Perform Action

By default, i-Vu CCN Pro performs an alarm action when the alarm source

generates an alarm

and

when it returns to normal. Under

Perform Action

you can

choose to:

•

Run the alarm action only when the alarm source generates an alarm

when

it returns to normal.

•

Wait for the specified amount of time, then run the alarm action if the alarm

has not been acknowledged or has not returned to normal. *

•

Run if the alarm occurs during the occupied hours defined for a schedule

group or run if the alarm occurs during the unoccupied hours defined for a

schedule group. *

EXAMPLE: To have i-Vu CCN Pro perform one alarm action during work hours

and a different alarm action after work hours:

Create a

schedule group

(page 49), but do not assign members to it.

Create a schedule for the group. Set the occupied hours to be the same

as the work hours.

Create the alarm action that you want i-Vu CCN Pro to perform during

work hours. Under

Run Conditions

, select

Run if schedule group <your

new group> is Occupied

Create the alarm action that you want i-Vu CCN Pro to perform during after hours.

Under

Run Conditions

, select

Run if schedule group <your new group> is

Unoccupied

NOTES

•

To keep the database table from growing too large, you must delete old entries using a third-party

database application. You cannot view, edit, or delete entries from i-Vu CCN Pro.

•

If your system uses an Access or MSDE database, you cannot open the database in a third-party

application while i-Vu CCN Pro or SiteBuilder is running.

Writing to a custom database

i-Vu CCN Pro can write alarm information to the following types of custom databases. The custom database

does not have to be the same type as the i-Vu CCN Pro database.

•

SQL Server

•

MySQL

•

PostgreSQL

Summary of Contents for i-Vu CCN Pro 4.2









































































































Search results

Summary of Contents for i-Vu CCN Pro 4.2

Reviews:

Related manuals for i-Vu CCN Pro 4.2

Brands by name

Popular brands

Carrier i-Vu CCN Pro 4.2, Installation Manual

Search results

Summary of Contents for i-Vu CCN Pro 4.2

Reviews:

Related manuals for i-Vu CCN Pro 4.2

Brands by name

Popular brands