Operating i-Vu CCN Pro
22
i-Vu CCN Pro 4.2
○
Type a number in the
Change All By
field (c).
8
Click
Set All To
or
Change All By
.
9
Click
Apply Changes
.
NOTE
To modify several properties in multiple control programs at the same time, use the
Global Copy
feature.
Create stand-alone applications
In
ApplicationBuilder,
you can create some pre-engineered, stand-alone equipment applications with a view
for
Consumable Reports
for
Energy Meters
(electric, gas, water, steam, generic), non-linear flow meters,
energy (BTU) consumption, and equipment runtime.
These options can be added to
CCN Values Only
and
Link Integration
custom equipments. Mapping the
points allows monitoring.
NOTES
•
One meter and one Runtime may be added to equipment.
•
There is an application for a CCN Vertical Pack unit. This is a CC with special software and BEST++.
While this controller can be discovered in i-Vu CCN Pro in
System Setup
as a Vertical Pack, none of the
possible selected options can be auto-discovered at this time, so only a base view will be generated. This
application allows the Installer to generate a correct equipment and view file based on the selected
options.
Assign and download a custom UC/CC equipment file
1
In the i-Vu CCN Pro navigation tree, right-click on the equipment and select
Configure
from the drop-
down menu.
