Operating i-Vu CCN Pro
i-Vu CCN Pro 4.2
33
To perform downloads from a Properties page or a microblock pop-up
Downloading from a Properties page downloads memory, parameters, and schedules for the selected
equipment.
1
Go to a
Properties
page or microblock pop-up for the equipment.
2
Click the
Download
button below the red download message at the top of the page.
NOTE
The
Download
button is visible only if a download is required.
If an item fails to download
All items that fail to download appear in the
Failures
list on the Download page. To attempt the download
again:
1
Select the item from the
Failures
list.
2
Review the reason for the failure at the bottom of the page.
3
Correct the problem.
4
Click
Add
to add the failed item to the
Download Items
list.
5
Click
OK
.
6
Select the item(s) in the
Download Items
list.
7
Click
Download Selected Items
.
To resolve a mismatch
A mismatch occurs when a value in a controller does not match the value in i-Vu CCN Pro Server. You can use
either of the following methods to handle mismatches in your system.
A. Select
Always upload properties from controllers to i-Vu CCN Pro Server on mismatch
on the
Communications
tab of the System Settings page to have i-Vu CCN Pro upload automatically.
B. Clear
Always upload properties from controllers to i-Vu CCN Pro Server on mismatch
so that you can
evaluate every mismatch to determine the correct value.
If you use method B and a mismatch occurs:
1
Go to the
Properties
page for the equipment.
2
Click
Details
at the top of the page.
3
Do one of the following:
○
Click
Upload
to upload parameters from the controller to i-Vu CCN Pro Server.
○
Click
Download
to download parameters from i-Vu CCN Pro Server to the controller.
Setpoints
Use setpoints to set temperature values that control the HVAC equipment. i-Vu CCN Pro displays green when
a zone is within the desired temperature range determined by the heating and cooling setpoints.
•
Programmed setpoints
are set and changed by operators.
