Carrier i-Vu CCN Pro 4.2 Installation Manual Download Page 58

Page: 58 / 104

Monitor and control equipment

i-Vu CCN Pro 4.2

To edit a graphic from i-Vu CCN Pro in ViewBuilder

NOTE

Only the

Installer

role has access to the following.

To edit a graphic from i-Vu CCN Pro

in ViewBuilder:

Select the piece of equipment in i-Vu CCN Pro navigation tree.

Right click on the equipment name and select

Configure

Click

Edit

button under

Views.

Click

Save

to desktop or other appropriate folder.

Open ViewBuilder.

Select

File

Open.

Browse to your saved graphic and click to open.

Edit as desired.

Save with a new name - the original system name is locked and cannot be used for an edited graphic.

NOTE

Names are case sensitive and should not have spaces and/or special characters.

To upload your graphic to i-Vu CCN Pro

Installer

role to upload graphics.

Select the area or equipment in the navigation tree.

Right-click and select

Configure

Click the

Add

button under

Views.

Browse to your .view graphic file that you created in ViewBuilder.

Click

Continue

Click

when message appears

File uploaded successfully

Click

again. The graphic should appear on your i-Vu CCN Pro screen.

Alarms

A message is sent from an alarm source to i-Vu CCN Pro to notify you that certain conditions exist, such as a

piece of equipment that has stopped running or a temperature that is too high. When i-Vu CCN Pro receives

an alarm, it displays information about the alarm on the

Alarms

page. i-Vu CCN Pro can also perform alarm

actions to inform personnel of the condition. An alarm source can also send a return-to-normal message

when the alarm condition returns to its normal state.
Alarm sources and the alarms they generate are assigned to categories, such as HVAC Critical or HVAC

Maintenance, to help you work with related alarms.
In i-Vu CCN Pro, you:

•

View, acknowledge, and delete alarms received by i-Vu CCN Pro

(page 53)

•

Set up the alarm actions that i-Vu CCN Pro performs

(page 56)

•

Set up new alarm sources to generate alarms

(page 71)

Summary of Contents for i-Vu CCN Pro 4.2









































































































Search results

Summary of Contents for i-Vu CCN Pro 4.2

Reviews:

Related manuals for i-Vu CCN Pro 4.2

Brands by name

Popular brands

Carrier i-Vu CCN Pro 4.2, Installation Manual

Search results

Summary of Contents for i-Vu CCN Pro 4.2

Reviews:

Related manuals for i-Vu CCN Pro 4.2

Brands by name

Popular brands