Carrier i-Vu CCN Pro 4.2 Installation Manual Download Page 51

Page: 51 / 104

Monitor and control equipment

i-Vu CCN Pro 4.2

Setpoints

•

Programmed setpoints

are set and changed by operators.

•

Effective setpoints

reflect the impact of other system conditions on the programmed setpoints, such as

setpoint adjustments, and hysteresis. Effective setpoints control the equipment.

To change programmed setpoints:

Navigate to a setpoint control in one of the following places:

○

The

Space Temperature Setpoints

section of the

Equipment

tab of a

Properties

page

○

Graphics

page

On a programmed setpoint bar, click and drag the segment or the gap between segments you want to

change.

Type new values in the

Heating

and

Cooling

fields.

TIP

You can click and drag a segment or a gap between segments to change setpoints.

Click

To display or change driver or set driver properties

NOTE

Only the

Installer

role has access to the following.

Summary of Contents for i-Vu CCN Pro 4.2









































































































Search results

Summary of Contents for i-Vu CCN Pro 4.2

Reviews:

Related manuals for i-Vu CCN Pro 4.2

Brands by name

Popular brands

Carrier i-Vu CCN Pro 4.2, Installation Manual

Search results

Summary of Contents for i-Vu CCN Pro 4.2

Reviews:

Related manuals for i-Vu CCN Pro 4.2

Brands by name

Popular brands