Carrier i-Vu CCN Pro 4.2 Installation Manual Download Page 11

Page: 11 / 104

Before starting your i-Vu CCN Pro

i-Vu CCN Pro 4.2

If using the Router as a Bridge, enter

CCN/Ethernet Gateway IP

(the IP address of the i-Vu device

manager that is configured as the Gateway). This is the same address that was entered in the

Host IP

address

for the CCN Gateway.

NOTE

Record the IP address of the gateway, because it is necessary to install the i-Vu CCN Pro.

Repeat the above steps for each i-Vu device manager used in the CCN system.

Step 4: System Preparation

Have a list of all of the devices at your job site, along with the name of each device, the bus and element

numbers, and their respective locations.

For a retrofit project which is already using CCN global and network schedules, you must have a list of all

existing CCN schedule numbers, systems using global and network schedules, and all global schedule

masters.

Verify that each device has a unique element number because duplicates will not scan correctly.

CAUTION

Do not use Bus 0, Element 238. It is automatically assigned to the i-Vu CCN Pro device.

Once equipment is scanned in, i-Vu CCN Pro begins broadcasting a 24/7 schedule to local CCN

schedule# 64.

NOTE

See

i-Vu CCN Pro CCN schedules

(page 46) in this document or consult the Help files for more

information.

i-Vu CCN Pro allows unlimited pieces of equipment: (140 per i-Vu CCN Router, 70 per i-Vu Link). The

device managers are each counted as a piece of equipment.

NOTE

CCN Bridges and Ethernet Gateways configured as Bridges are each counted as a piece of

equipment by the i-Vu CCN Pro.

Step 5: Set up a computer and browser to view i-Vu CCN Pro

NOTES

•

i-Vu CCN Pro Server must be running before operators can log in from client browsers.

•

To view trends, client computers need Sun's Java VM plugin. Go to

Main Menu

System Options > Client

Installs

page for a link to the Java website.

Browser settings

Where to change setting

Accept First-party and Third-party

cookies.*

Tools > Internet Options > Privacy tab >Advanced button

Automatically check for newer

versions of stored pages.*

Tools > Internet Options > General tab > Settings button

Summary of Contents for i-Vu CCN Pro 4.2









































































































Search results

Summary of Contents for i-Vu CCN Pro 4.2

Reviews:

Related manuals for i-Vu CCN Pro 4.2

Brands by name

Popular brands

Carrier i-Vu CCN Pro 4.2, Installation Manual

Search results

Summary of Contents for i-Vu CCN Pro 4.2

Reviews:

Related manuals for i-Vu CCN Pro 4.2

Brands by name

Popular brands