Monitor and control equipment
62
i-Vu CCN Pro 4.2
Field
Notes
Run Conditions
By default, i-Vu CCN Pro performs an alarm action when the alarm source
generates an alarm
and
when it returns to normal. Under
Perform Action
you can
choose to:
•
Run the alarm action only when the alarm source generates an alarm
or
when
it returns to normal.
•
Wait for the specified amount of time, then run the alarm action if the alarm
has not been acknowledged or has not returned to normal. *
•
Run if the alarm occurs during the occupied hours defined for a schedule
group or run if the alarm occurs during the unoccupied hours defined for a
schedule group. *
EXAMPLE: To have i-Vu CCN Pro perform one alarm action during work hours
and a different alarm action after work hours:
1.
Create a
schedule group
(page 49), but do not assign members to it.
2.
Create a schedule for the group. Set the occupied hours to be the same as
the work hours.
3.
Create the alarm action that you want i-Vu CCN Pro to perform during work
hours. Under
Run Conditions
, select
Run if schedule group <your new
group> is Occupied
.
Create the alarm action that you want i-Vu CCN Pro to perform during after hours.
Under
Run Conditions
, select
Run if schedule group <your new group> is
Unoccupied
.
NOTE
You should not assign this alarm action to frequently-occurring alarms as this may cause problems on
your network or the Internet.
To set up a dial-up networking connection
i-Vu CCN Pro can use a dial-up internet connection through a modem to deliver e-mail for the Send E-mail or
Send Alphanumeric Page alarm action.
To set up the dial-up connection:
1
Set up your modem to dial out to your Internet Service Provider. See your modem documentation.
2
On the i-Vu CCN Pro server, open Internet Explorer.
3
Select
Tools > Internet Options
.
4
On the
Connections
tab, click
Setup
.
5
Follow the instructions in the wizard. See Windows Help for assistance.
6
In a text editor such as Windows
Notepad, open i-Vu CCN Pro
x.x\webroot\<system>\
system.properties
.
7
At the end of the file, type the following line:
repactions.connection.name=<name of connection>
where <name of connection> is the ISP name you entered in the wizard in step 2.
8
Open Internet Explorer, then select
Tools > Internet Options > Connections
tab.
9
If the box under
Dial-up and Virtual Private Network settings
shows more than one connection, select
the connection you just created, then click
Set Default
.
10
Select
Always dial my default connection
.
