manualshive.com logo in svg

Canon MultiPASS L60, User Manual, Page: 74 / 341

Share
Download
Canon MultiPASS L60 User Manual Download Page 74

3-2

Registering Information in the MultiPASS L60

Chapter 3

Methods for Registering Information in the
MultiPASS L60

To customise the MultiPASS L60 to your particular needs, you can
adjust general operation, sending, receiving, and speed dialling settings.
There are two methods of adjusting these settings:

Method 1: Using the MultiPASS L60 operation panel

You can adjust settings directly via the operation panel of the MultiPASS
L60. Detailed instructions  are described in this user’s guide. Adjusting
settings through the operation panel is convenient when you do not
have your MultiPASS L60 connected to a PC.

Method 2: Using the MultiPASS Desktop Manager

You can adjust settings using the MultiPASS Desktop Manager software
included with your MultiPASS L60. For detailed instructions refer to the
MultiPASS Desktop Manager 

User’s Guide

.

Before adjusting any settings, decide whether you prefer to make
changes from the operation panel or from the MultiPASS Desktop
Manager. Using both—the operation panel and the MultiPASS Desktop
Manager—may cause confusion. Changes made to settings through the
operation panel will not be displayed in the MultiPASS Desktop
Manager, and changes made in the MultiPASS Desktop Manager will
override any corresponding settings made through the operation panel.

N

If your MultiPASS L60 unit is connected to a PC, we recommend the use
of the MultiPASS Desktop Manager to adjust any settings.

Summary of Contents for MultiPASS L60






















































































































































































































































































































































Reviews:

No comments